Component family
Machined Brackets and Housings
Machined castings, fabrications and brackets, with hole patterns held to true position against the drawing datums.
The work
Flat, square, and located where the drawing says
Brackets look forgiving and are not. Most arrive as castings or fabrications carrying stock that moves the moment it is cut, so the first operation establishes a datum the rest of the part is built from, rather than referencing as-cast surfaces and accepting wherever the pattern falls. On the horizontal centre several faces are finished in one clamping, which is what keeps a hole pattern true to the mounting face.
- Materials
- Grey and ductile iron castings, steel fabrications, aluminium alloys, and bar stock where the quantity suits it.
- Size range
- 600 x 500 x 500 mm on the horizontal centre, 1200 x 450 x 450 mm on the vertical centres.
- Features handled
- Datum faces, bored and reamed bushes and dowel holes, tapped mounting patterns, spot faces, milled slots and pads, and cross drilling.
- Inspection
- True position of hole patterns on the CMM taken against the drawing datums rather than against a convenient edge. Flatness and squareness on the CMM.
Accuracy
Made to the drawing, proved against it
The characteristic that decides the part is best identified at enquiry stage, so that capability is confirmed against it rather than against a general figure.
Certification route
Anicon holds ISO 9001:2015. Where a part calls for IATF 16949 it is supplied through Versatile Equipments Pvt Ltd, certified to IATF 16949 and ISO 9001:2015. Anicon’s own IATF certification is in progress.
Related families
Send the drawing
A clear answer inside a working day
A 2D or 3D file, the quantity and the date you need it. You will get a considered reply within one working day, including the reply that we are not the right shop for the part, which is worth knowing early. A mutual NDA is issued first on request.